Petrol Performance Trio

EUROSOL Petrol System helps clean and maintain petrol fuel systems. It is suitable for two stroke, four stroke and rotary petrol engines, including carburettor and fuel injection systems, using petrol complying with DIN EN 228 or biofuels.

How to use

Add one bottle to the petrol tank before filling up. Use every three months and after extended periods of downtime, as well as at the vehicle manufacturer's scheduled workshop service intervals.

Dosage: One bottle treats up to 150 litres of petrol. Follow the bottle instructions and the vehicle manufacturer's guidance.

Petrol System safety information

DANGER: Safety data sheet here.

CONTENT: Hazard-determining components: 4-Methylpentan-2-one; Isobutyl methyl ketone, Isotridecanol, ethoxylated, Hydrocarbons, C10, Aromatics, >1% Naphthalene

HAZARD STATEMENTS:
Highly flammable liquid and vapor. Causes serious eye damage. Harmful if inhaled. May cause respiratory irritation. May cause drowsiness or dizziness. Suspected of causing cancer. Harmful to aquatic life with long lasting effects.

PRECAUTIONARY STATEMENTS:
If medical advice is needed, have product container or label at hand. Keep out of reach of children. Wear protective gloves and eye/face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Store in a well-ventilated place. Keep cool. Dispose of contents/container in accordance with local regulations.

FURTHER INFORMATION:
Repeated exposure may cause skin dryness or cracking.

EUROSOL High Performance Oil Additive is added to engine oil as part of regular maintenance. Use it with the prescribed engine oil. It is suitable for petrol, diesel and rotary engines, manual gearboxes, differentials and fine filtration systems.

How to use

Add to fresh engine oil after an oil change. The product instructions also cover topping up during a service interval and use with bypass fine filtration systems.

Dosage: One 400 ml bottle treats up to 10 litres of engine oil capacity. For manual gearboxes and differentials, replace 10 percent of the gear oil volume with the additive.

Follow the product instructions and the vehicle manufacturer's guidance. Keep the prescribed oil and filter change schedule.

High Performance Oil Additive safety information

Safety information: Read the product instructions and the safety data sheet before use.

EUROSOL Oil System is an engine flush used with the old engine oil before an oil and filter change. It is intended to loosen deposits in the oil and lubrication circuit. The product instructions also list manual and automatic transmissions, power steering, hydraulic systems, differentials and fine filtration systems.

How to use

Add to the used engine oil before the oil change. Run the engine for approximately 10 minutes, then change the oil and oil filter.

Dosage: One 400 ml bottle treats up to 6 litres of oil capacity.

For fine filtration systems, change the filter element and top up with EUROSOL High Performance Oil Additive as directed in the product instructions. Check the instructions for the particular system before use. Follow the vehicle manufacturer's service schedule and arrange for used oil to be disposed of correctly.

Oil System Engine Flush safety information

DANGER: Safety data sheet here.

CONTENT: Hazard-determining components: Distillates (petroleum), solvent-dewaxed light paraffinic; Base oil

HAZARD STATEMENTS:
May be fatal if swallowed and enters airways.

PRECAUTIONARY STATEMENTS:
If medical advice is needed, have product container or label at hand. Keep out of reach of children.
IF SWALLOWED: Immediately call a POISON CENTER/doctor. Do NOT induce vomiting.
Keep container locked up. Dispose of contents/container in accordance with local regulations.